标题: 【刘宪虎简介】郑州大学橡塑模具国家工程研究中心研究生导师 [打印本页] 作者: 郑大考研网 时间: 2018-2-4 09:17 标题: 【刘宪虎简介】郑州大学橡塑模具国家工程研究中心研究生导师 刘宪虎，男，汉族，中共党员，1985年生于山东昌乐，博士，郑州大学副教授（直聘）。目前发表SCI论文20多篇，其中第一作者和通讯作者共16篇，总影响因子加和53, 其中9篇影响因子大于3.0。在第 22届国际会议Word Forum on Advanced Materials(POLYCHAR22)上荣获“Carl Klason Prize for the best student presentation”奖项。目前主要研究领域和方向为：导电高分子复合材料、流动诱导结晶；高分子及其复合材料流行行为；共混物多相体系设计与调控等。
2012年9月-2016年8月，德国埃尔朗根-纽伦堡大学高分子材料专业，师从Dirk W. Schubert教授，获理学硕士学位和工学博士学位。
2016年10月-至今，郑州大学橡塑模具国家工程研究中心副教授。
发表论文：
(22) Yamin Pan，Xianhu Liua(*)，Joachim Kaschta，Xiaoqiong Hao，Chuntai Liub(*)，Dirk W. Schubert(*)，Viscoelastic and electrical behavior of poly(methyl methacrylate)/carbon black composites prior to and after annealing，Polymer，2017，Doi：10.1016/j.polymer.2017.02.050
(21) Zhongzhu Liu，Xianhu Liu，Guoqiang Zheng(*)，Kun Dai，Chuntai Liu(*)，Changyu Shen，Rui Yin，Zhanhu Guo，Mechanical enhancement of melt-stretched β-nucleated isotactic polypropylene: The role of lamellar branching of β-crystal，polymer testing，2017， 58 ：227~235
(20) Yamin Pan，Xianhu Liu(*)，Xiaoqiong Hao，Dirk W. Schubert(*)，Conductivity and phase morphology of carbon black-filled immiscible polymer blends under creep: an experimental and theoretical study.，Phys.Chem.Chem.Phys.，2016，18（47）：32125~32131
(19) Yamin Pan，Xianhu Liu(*)，Suyu Shi，Chuntai Liu，Kun Dai，Rui Yin(*)，Dirk W. Schubert，Guoqiang Zheng(*)，Changyu Shen，Annealing Induced Mechanical Reinforcement of Injection Molded iPP Parts，Macromolecular Materials and Engineering，2016， 301：1468~1472
(18) Yamin Pan，Xianhu Liu(*)，Xiaoqiong Hao，Zdenk Star?，Dirk W. Schubert(*)，Enhancing the electrical conductivity of carbon black-filled immiscible polymer blends by tuning the morphology，European Polymer Journal，2016，78：106~115
(17) Xianhu Liu(*)，Dirk W. Schubert(*)，Influence of the pressure-dependent contact area between electrode and composite surface on the electrical conductivity，Composite Structures，2016，136：414~418
(16) Xianhu Liu，Yamin Pan，Guoqiang Zheng(*)，Chuntai Liu(*)，Suppression of the hierarchical structure of water-assisted injection moulded iPP in the presence of a beta-nucleating agent and lamellar branching of a beta-crystal，RSC Advances，2016，6（73）：68969~68972
(15) Xiaoqiong Hao(*)，Joachim Kaschta，Yamin Pan，Xianhu Liu，Dirk W. Schubert，Intermolecular cooperativity and entanglement network in a miscible PLA/PMMA blend in the presence of nanosilica，Polymer (United Kingdom)，2016，82：57~65
(14) Xianhu Liu(*)，Yamin Pan，Xiaoqiong Hao，Kun Dai，Dirk W. Schubert(*)，The role of conductive pathways in the conductivity and rheological behavior of poly(methyl methacrylate)-graphite composites，Journal of Applied Polymer Science，2016，133（32）
(13) Xianhu Liu，Yamin Pan，Cheng Peng，Xiaoqiong Hao，Guoqiang Zheng(*)，Dirk W. Schubert，Chuntai Liu(*)，Changyu Shen，Twisted lamellae in water-assisted injection molded high density polyethylene，Materials Letters，2016，172：19~22
(12) Xianhu Liu(*)，Yamin Pan，Guoqiang Zheng，Dirk W. Schubert(*)，Rheological and electrical behavior of poly(methyl methacrylate)/carbon black composites as investigated by creep recovery in shear，Composites Science and Technology，2016，128：1~7
(11) Xianhu Liu，Johannes Krückel，Dirk W. Schubert(*)，Building and testing a simple setup to investigate the electrical properties of polymer/carbon black composites，Composite Structures，2015，129：55~59
(10) Xiaoqiong Hao(*)，Joachim Kaschta，Xianhu Liu，Yamin Pan，Dirk W. Schubert，Entanglement network formed in miscible PLA/PMMA blends and its role in rheological and thermo-mechanical properties of the blends，Polymer (United Kingdom)，2015，80：38~45
(9) Zhongzhu Liu，Xianhu Liu，Guoqiang Zheng(*)，Kun Dai，Chuntai Liu，Changyu Shen，New insight into lamellar branching of beta-nucleated isotactic polypropylene upon melt-stretching: WAXD and SAXS study，Journal of Materials Science，2015，50（2）：599~604
(8) Yue Wei，Zeyu Li，Xianhu Liu，Kun Dai(*)，Guoqiang Zheng，Chuntai Liu，Jingbo Chen，Changyu Shen，Temperature-resistivity characteristics of a segregated conductive CB/PP/UHMWPE composite，Colloid and Polymer Science，2014，（292）：2891~2898
(7) Xianhu Liu，Johannes Krueckel，Guoqiang Zheng，Dirk W. Schubert(*)，Electrical conductivity behaviour of sheared poly(methyl methacrylate)/carbon black composites，Composites Science and Technology，2014，100：99~104
(6) Xianhu Liu，Johannes Krueckel，Guoqiang Zheng，Dirk W. Schubert(*)，Mapping the Electrical Conductivity of Poly(methyl methacrylate)/Carbon Black Composites Prior to and after Shear，ACS Applied Materials & Interfaces，2013，5（18）：8857~8860
(5) Xianhu Liu，Kun Dai，Xiaoqiong Hao，Guoqiang Zheng(*)，Chuntai Liu(*)，Dirk W. Schubert，Changyu Shen，Crystalline Structure of Injection Molded beta-Isotactic Polypropylene: Analysis of the Oriented Shear Zone，Industrial & Engineering Chemistry Research，2013，52（34）：11996~12002
(4) Xianhu Liu，Changyan Zhang，Kun Dai，Guoqiang Zheng(*)，Chuntai Liu(*)，Changyu Shen，Unexpected molecular weight dependence of shish kebab in water-assisted injection molded HDPE，Polymers for Advanced Technologies，2012，24（2）：270~272
(3) Guoqiang Zheng，Zhenhua Jia，Xianhu Liu，Baochen Liu，Xiaoli Zhang，Kun Dai，Chunguang Shao，Xuejing Zheng，Chuntai Liu(*)，Wei Cao，Jingbo Chen，Xiangfang Peng，Qian Li，Changyu Shen(*)，Enhanced Orientation of the Water-Assisted Injection-Molded iPP in the Presence of Nucleating Agent，Polymer Engineering and Science，2012，52（4）：725~732 （SCI引用超过20多次）
(2) Xianhu Liu，Guoqiang Zheng(*)，Zhenhua Jia，Songwei Li，Chenggang Liu，Yang Zhang，Chunguang Shao，Kun Dai，Baochen Liu，Qinxing Zhang，Songjie Wang，Chuntai Liu，Jingbo Chen，Xiangfang Peng，Changyu Shen(*)，The hierarchical structure of water-assisted injection molded high density polyethylene: Small angle X-ray scattering study，Journal of Applied Polymer Science，2012，125（3）：2297~2303
(1) Xianhu Liu，Guoqiang Zheng(*)，Kun Dai，Zhenhua Jia，Songwei Li，Chuntai Liu(*)，Jingbo Chen，Changyu Shen，Qian Li，Morphological comparison of isotactic polypropylene molded by water-assisted and conventional injection molding，Journal of Materials Science，2011，46（24）：7830~7838