郑大考研网育博书店

标题: 【刘宪虎简介】郑州大学橡塑模具国家工程研究中心研究生导师 [打印本页]

作者: 郑大考研网    时间: 2018-2-4 09:17
标题: 【刘宪虎简介】郑州大学橡塑模具国家工程研究中心研究生导师
刘宪虎,男,汉族,中共党员,1985年生于山东昌乐,博士,郑州大学副教授(直聘)。目前发表SCI论文20多篇,其中第一作者和通讯作者共16篇,总影响因子加和53, 其中9篇影响因子大于3.0。在第 22届国际会议Word Forum on Advanced Materials(POLYCHAR22)上荣获“Carl Klason Prize for the best student presentation”奖项。目前主要研究领域和方向为:导电高分子复合材料、流动诱导结晶;高分子及其复合材料流行行为;共混物多相体系设计与调控等。

联系方式:

Tel.:  186 2493 3706

Mail: xianhu.liu@zzu.edu.cn   

Room: 905

个人简历:

2005年9月-2009年7月, 山东科技大学机械电子工程学院材料成型及控制工程读本科,获工学学士学位;

2009年9月-2015年7月,郑州大学材料加工工程专业硕博连读,师从申长雨院士,获博士学位;

2012年9月-2016年8月,德国埃尔朗根-纽伦堡大学高分子材料专业,师从Dirk W. Schubert教授,获理学硕士学位和工学博士学位。

2016年10月-至今,郑州大学橡塑模具国家工程研究中心副教授。

发表论文:

(22) Yamin Pan,Xianhu Liua(*),Joachim Kaschta,Xiaoqiong Hao,Chuntai Liub(*),Dirk W. Schubert(*),Viscoelastic and electrical behavior of poly(methyl methacrylate)/carbon black composites prior to and after annealing,Polymer,2017,Doi:10.1016/j.polymer.2017.02.050

(21) Zhongzhu Liu,Xianhu Liu,Guoqiang Zheng(*),Kun Dai,Chuntai Liu(*),Changyu Shen,Rui Yin,Zhanhu Guo,Mechanical enhancement of melt-stretched β-nucleated isotactic polypropylene: The role of lamellar branching of β-crystal,polymer testing,2017, 58 :227~235

(20) Yamin Pan,Xianhu Liu(*),Xiaoqiong Hao,Dirk W. Schubert(*),Conductivity and phase morphology of carbon black-filled immiscible polymer blends under creep: an experimental and theoretical study.,Phys.Chem.Chem.Phys.,2016,18(47):32125~32131

(19) Yamin Pan,Xianhu Liu(*),Suyu Shi,Chuntai Liu,Kun Dai,Rui Yin(*),Dirk W. Schubert,Guoqiang Zheng(*),Changyu Shen,Annealing Induced Mechanical Reinforcement of Injection Molded iPP Parts,Macromolecular Materials and Engineering,2016, 301:1468~1472

(18) Yamin Pan,Xianhu Liu(*),Xiaoqiong Hao,Zdenk Star?,Dirk W. Schubert(*),Enhancing the electrical conductivity of carbon black-filled immiscible polymer blends by tuning the morphology,European Polymer Journal,2016,78:106~115

(17) Xianhu Liu(*),Dirk W. Schubert(*),Influence of the pressure-dependent contact area between electrode and composite surface on the electrical conductivity,Composite Structures,2016,136:414~418

(16) Xianhu Liu,Yamin Pan,Guoqiang Zheng(*),Chuntai Liu(*),Suppression of the hierarchical structure of water-assisted injection moulded iPP in the presence of a beta-nucleating agent and lamellar branching of a beta-crystal,RSC Advances,2016,6(73):68969~68972

(15) Xiaoqiong Hao(*),Joachim Kaschta,Yamin Pan,Xianhu Liu,Dirk W. Schubert,Intermolecular cooperativity and entanglement network in a miscible PLA/PMMA blend in the presence of nanosilica,Polymer (United Kingdom),2016,82:57~65

(14) Xianhu Liu(*),Yamin Pan,Xiaoqiong Hao,Kun Dai,Dirk W. Schubert(*),The role of conductive pathways in the conductivity and rheological behavior of poly(methyl methacrylate)-graphite composites,Journal of Applied Polymer Science,2016,133(32)

(13) Xianhu Liu,Yamin Pan,Cheng Peng,Xiaoqiong Hao,Guoqiang Zheng(*),Dirk W. Schubert,Chuntai Liu(*),Changyu Shen,Twisted lamellae in water-assisted injection molded high density polyethylene,Materials Letters,2016,172:19~22

(12) Xianhu Liu(*),Yamin Pan,Guoqiang Zheng,Dirk W. Schubert(*),Rheological and electrical behavior of poly(methyl methacrylate)/carbon black composites as investigated by creep recovery in shear,Composites Science and Technology,2016,128:1~7

(11) Xianhu Liu,Johannes Krückel,Dirk W. Schubert(*),Building and testing a simple setup to investigate the electrical properties of polymer/carbon black composites,Composite Structures,2015,129:55~59

(10) Xiaoqiong Hao(*),Joachim Kaschta,Xianhu Liu,Yamin Pan,Dirk W. Schubert,Entanglement network formed in miscible PLA/PMMA blends and its role in rheological and thermo-mechanical properties of the blends,Polymer (United Kingdom),2015,80:38~45

(9) Zhongzhu Liu,Xianhu Liu,Guoqiang Zheng(*),Kun Dai,Chuntai Liu,Changyu Shen,New insight into lamellar branching of beta-nucleated isotactic polypropylene upon melt-stretching: WAXD and SAXS study,Journal of Materials Science,2015,50(2):599~604

(8) Yue Wei,Zeyu Li,Xianhu Liu,Kun Dai(*),Guoqiang Zheng,Chuntai Liu,Jingbo Chen,Changyu Shen,Temperature-resistivity characteristics of a segregated conductive CB/PP/UHMWPE composite,Colloid and Polymer Science,2014,(292):2891~2898

(7) Xianhu Liu,Johannes Krueckel,Guoqiang Zheng,Dirk W. Schubert(*),Electrical conductivity behaviour of sheared poly(methyl methacrylate)/carbon black composites,Composites Science and Technology,2014,100:99~104

(6) Xianhu Liu,Johannes Krueckel,Guoqiang Zheng,Dirk W. Schubert(*),Mapping the Electrical Conductivity of Poly(methyl methacrylate)/Carbon Black Composites Prior to and after Shear,ACS Applied Materials & Interfaces,2013,5(18):8857~8860

(5) Xianhu Liu,Kun Dai,Xiaoqiong Hao,Guoqiang Zheng(*),Chuntai Liu(*),Dirk W. Schubert,Changyu Shen,Crystalline Structure of Injection Molded beta-Isotactic Polypropylene: Analysis of the Oriented Shear Zone,Industrial & Engineering Chemistry Research,2013,52(34):11996~12002

(4) Xianhu Liu,Changyan Zhang,Kun Dai,Guoqiang Zheng(*),Chuntai Liu(*),Changyu Shen,Unexpected molecular weight dependence of shish kebab in water-assisted injection molded HDPE,Polymers for Advanced Technologies,2012,24(2):270~272

(3) Guoqiang Zheng,Zhenhua Jia,Xianhu Liu,Baochen Liu,Xiaoli Zhang,Kun Dai,Chunguang Shao,Xuejing Zheng,Chuntai Liu(*),Wei Cao,Jingbo Chen,Xiangfang Peng,Qian Li,Changyu Shen(*),Enhanced Orientation of the Water-Assisted Injection-Molded iPP in the Presence of Nucleating Agent,Polymer Engineering and Science,2012,52(4):725~732 (SCI引用超过20多次)

(2) Xianhu Liu,Guoqiang Zheng(*),Zhenhua Jia,Songwei Li,Chenggang Liu,Yang Zhang,Chunguang Shao,Kun Dai,Baochen Liu,Qinxing Zhang,Songjie Wang,Chuntai Liu,Jingbo Chen,Xiangfang Peng,Changyu Shen(*),The hierarchical structure of water-assisted injection molded high density polyethylene: Small angle X-ray scattering study,Journal of Applied Polymer Science,2012,125(3):2297~2303

(1) Xianhu Liu,Guoqiang Zheng(*),Kun Dai,Zhenhua Jia,Songwei Li,Chuntai Liu(*),Jingbo Chen,Changyu Shen,Qian Li,Morphological comparison of isotactic polypropylene molded by water-assisted and conventional injection molding,Journal of Materials Science,2011,46(24):7830~7838






欢迎光临 郑大考研网育博书店 (http://bbs.zzuedu.com/) Powered by Discuz! X2.5